Part 1: Andros F6A, Remotec – Bomb disposal robot: Metal eight wheeled robot on articulated tracks with lights, camera and arm with claw.
Makers marks:
On both front and back small wheels: Embossed: “C 2400-1004 C”
Front wheel attachment. Proper right: Engraved. “6A13 – 003” Proper left: Engraved. “27 1 0”.
On all 6 smallest circular attachments on wheeled articulated tracks: embossed “1098”
Makers Plate front centre of body. Printed. “REMOTEC ([r circled] above c) / 114 UNION VALLEY ROAD OAK RIDGE, TENNESSEE 37830 / Made in USA".
Battery attached with wires to the base of the body: “18/01/2012”
printed (half of writing is covered by a wooden panel) “ SYNERO […] / POWER SOLUTI [ons?] / VRLA / CAUTION: / Do not short circuit / Do not charge under air tight condit [ions?] / Do not disassemble, or drop / Do not expose to flame of spark / Keep out of reach of children / “
Proper right top of the box attached with wires to the base of the body: “120 71 171”
Proper right metal rectangular attachment to base of arm with claw: makers mark/model number: “ENGEL / […] / 20 1 / ENGEL GMBH Wiesbaden”
Proper right metal cylinder attachment to base of arm with claw makers mark/model number: “ ENGEL / Typ: GNM3150-G2.6 / Ser. / Motor-Nr. 1355[…]22 / […] / 24 V- 3.9 A 70 W / 4000 min [small -1 above the n] S 1 I.C.I […] / IP 41 zul. Spitzenstrom 38 A / ENGEL GmbH Wiesbaden / Made in Germany/ “
Below the cylinder on the proper right side: engraved “ UP [arrow pointing right] UP”
Proper right metal rectangular attachment to middle joint of arm with claw, above metal cylinder: makers mark printed “ ENGEL / Typ: G 2.6 / 20:1 / ENGEL GMBH Wiesbaden /”
Proper right metal cylinder attachment to the middle joint of arm with claw makers mark/model number “ ENGEL / Typ: GNM3150-G2.6 / Ser. Motor-Nr. 1355572 / G.-Mot. Feld: PERM. MAGNET / 24 V- 3.9 A 70 W / 4000 min [small -1 above the n] S 1 I.C.I F / IP 41 zul. Spitzenstrom 38 A / ENGEL GmbH Wiesbaden / Made in Germany / “
Above the cylinder on the proper right side: engraved “ UP [arrow pointing left] UP”
Proper right metal rectangular attachment to top joint of arm with claw, above metal cylinder: makers mark printed “ ENGEL / Typ: G 1.2 / 30:1 / ENGEL GMBH Wiesbaden / “
Proper right metal cylinder attachment to the top joint of arm with claw makers mark/model number: (damage to top left of the sticker) “ ENGEL / […] 636-G1.2 / S[…] Motor-Nr. 1361017 / G.-M[…] Feld: PERM. MAGNET / 24 V 1,4 A .1[…] / 3000 min [small -1 above the n] S 1 I.C.I F / IP 41 zul. Spitzenstrom 14.5 A / ENGEL Elektromotoren GmbH Wiesbaden / Made in Germany / “
Proper left of arm with claw, metal joint attached to camera: embossed “ [circle] MOTION / EATONTOWN / NJ USA 2”
Inside camera lens on top of metal arm with claw: printed “ Watec”
“ […] / W.A. HAMMOND / DRIERITE CO. / YENIA OHIO “
Proper right of bottom light stand base behind arm with claw: printed plate “P6”
texter hand written “ -ve “
texter hand written “ P9”
Speaker/sensor bottom of light stand proper left: printed sticker “ H “
Proper left of rectangular metal middle base of light stand : embossed “ D 7045 64510[?] “
Proper left of support holding light box: embossed “ […] – 2 02 1 – 50 16 C [circle] “
Metal cylinder proper left of support holding light box : printed makers mark/ model number “ ENGEL / Typ: GNM2636-G1.2 / Ser. Motor-Nr. 1356061 / G.-Mot. Feld: PERM. MAGNET / 24 V- 1.4 A […] / 3000 min [small -1 above the n] S […] I.C.I. F / IP 41 zul. Spitzenstrom 14.5 A / ENGEL Elektromotoren GmbH Wiesbaden / Made in Germany / “

Part 2: Andros F6A Remotec Bomb Disposal Robot Control Unit
Metal mobile two wheeled control unit with integrated power cords, monitor, and microphone. Attaches to robot by long tether cord (Part 3). Black hand-held microphone (Part 4) attached by a wire to the control unit box proper right. Two keys (Parts 5 & 6) are located in the keyhole on the proper left which are attached to the unit with rope.
Makers marks:
Front of control unit proper right top corner : sticker printed “ [logo] [logo] BECA / […] AR 2000 COMPLIANCE AUDIT / […] Code 1803[handwritten] Label 0427”
Top of control unit box: printed plate “ ANDROS / REMOTEC / Made in USA / “
Underneath left knob on top of control unit box: printed plate “ SPEAKER / VOLUME “
Underneath right knob on top of control unit box: printed plate “ MICROPHONE / VOLUME “
Proper left of control unit box near microphone : printed plate “ MICROPHONE / HEADPHONE “
“ POWER/ OFF ON “
Proper left of control unit box above plugs “ P3 J4”
Underneath control unit box proper right: embossed “ 6A13 003 / 2710”
Red pull tab/cord underneath control unit box cord reel: “ WARNING / DO NOT REMOVE / COVER “

Part 7: Andros F6A Remotec Bomb Disposal Robot Controller
Metal hand-held Remotec controller unit which connects to the control unit with tether cord (Part 8). Material neck strap attached. Key (Part 9) is in the keyhole on the right which is attached to the controller with rope.
Makers marks:
Back of controller – top: scratched into metal “ 6A13 – DO3 / 2710 “
Front panel of controller – engraved: “ REMOTEC “
(following in columns from top to bottom, left to right)
“ LIFT UP / PAN LT RT / DN / 1 UP / 2 DN / CAMERA EXTEND / OUT OUT IN IN ZOOM FOCUS / DARK LIGHT LIGHT OFF IRIS DARK[sticker]”
“ LO HI / SPEED”
“ OPEN EXTERNAL UP[sticker] / WRIST / CLOSE DOWN[sticker] GRIP ROTATE / DOWN[sticker] UP[sticker] SHLD UP[sticker] ELBOW / DOWN[sticker] / LT RT TAKE UP UNWIND/ TORSO CABLE REEL / X UP HIGH UP X / FRONT REAR / DN LOW DN / SPEED “
“SAFETY / 1 2 V / OFF S / VEHICLE TOOL SELECT / ON[sticker] / ON ON / TOOL LASER ENABLE / FORWARD / LT RT / VEHICLE DRIVE “